However, when trying to print a 2 5/16 x 4 label from 6.5++ it wants to start the label in the middle and print to the bottom, i.e. I only get my return address and not the destination address.
I believe I have set the dimensions correctly so what am I doing wrong?
Jeff,
Actually you are not doing anything wrong. By default, the Dymo Label Printer is installed for "Portrait" Printing. You need to change the printer default to print as "Landscape".
Here's how:
If installed properly on Windows 2000/XP Workstation, you should be able to see the DYMO LabelWriter 330 Turbo-USB as one of the listed printer in Windows Printer Configuration Panel.
Start | Settings | Printers
You'll need to update the Printing Preferences of DYMO LabelWriter 330 Tubo-USB printer as following:
01. Right-Click on DYMO LabelWriter 330 Tubo-USB printer icon
02. Select Printing Preferences...
03. Change Orientation to Landscape
04. Click on [Advanced] button for Advanced Properties
05. Change the properties as following:
Paper Size: 99014 Shipping
Copy Count: 1 Copy
Advanced Printing Features: Enabled
Halftoning: Super Cell
Printer Quality: Barcodes and Graphics
Print Quality: NormalClick on [OK] when done
06. Click on [Apply] button to save and then click on [OK] to save
Printing Preferences.Hope that helps!
Very Best R:egards,
Razzak.
