[RBASE-L] - Re: Syntax Problem Solved

[Dan Champion]

And to add to this, Dawn had the eagle Eye... the L was the reason I was misdirected.  Once I figured that, I began to think of what I did Saturday, and that was re-codelock it with 7.5.    Codelocked it with 6.5++ and all was well.




At 01:00 PM 5/15/2006, you wrote:

Thanks to all,
Turns out the problem was I used 7.5 to codelock an old file. (one that can only run on 6.5++ and previous)  When I went back and re-codelocked it with 6.5++ all was well.
Dan



At 10:53 AM 5/15/2006, you wrote:

Good morning,
  I had some older code fail today, and I can't see why. Can anyone see this?

Setup:  Rbase 6.5++ Windows



PRINT  job_rpt  WHERE  jobnum = .whval0

fails where

PRINT  job_rpt  WHERE  jobnum = "18074"

works fine.

The variable whva10 is Text, Quotes are ".  What is the difference, and why could this just start failing this morning with no changes to the database that I know of?

Dan Champion

 Service Department Manager
Vredevoogd Heating & Cooling
    Grandville, MI. 49418    
        616-534-8329
    616-299-7420 cell

Dan Champion

 Service Department Manager
Vredevoogd Heating & Cooling
    Grandville, MI. 49418    
        616-534-8329
    616-299-7420 cell

Dan Champion

 Service Department Manager
Vredevoogd Heating & Cooling
    Grandville, MI. 49418    
        616-534-8329
    616-299-7420 cell