John, Then I suggest you send your test form X and tables to the dream team at [EMAIL PROTECTED]
Claudine :) -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of John Docherty Sent: Sunday, February 10, 2008 5:16 PM To: RBASE-L Mailing List Subject: [RBASE-L] - Re: DB LookupListBox Error Claudine, It worked with RBase 7.5.25.31212 - I have just checked using an old database and 7.5. But when I connect to the same database using 7.6 the error occurs. So it looks like something has changed somewhere along the way. Regards, John Docherty -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Claudine Robbins Sent: Monday, 11 February 2008 11:46 a.m. To: RBASE-L Mailing List Subject: [RBASE-L] - Re: DB LookupListBox Error Well, I don't have any other suggestions right now. Good luck! Claudine :) -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of John Docherty Sent: Sunday, February 10, 2008 4:40 PM To: RBASE-L Mailing List Subject: [RBASE-L] - Re: DB LookupListBox Error Claudine, No errors on Autochk, same problem in ABC with the simple form. I will try some more 'fiddling' - I may be able to try with an older version of RBase and an older database on another PC later today to see if I can find a combination that does work without the error. Thanks for your assistance, and time. I will let you know if I make any significant discoveries. Regards, John Docherty -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Claudine Robbins Sent: Monday, 11 February 2008 11:19 a.m. To: RBASE-L Mailing List Subject: [RBASE-L] - Re: DB LookupListBox Error John, So the problem is wider than this form! Backup your database. Disconnect your db and type AUTOCHK dbname FULL at the R> prompt. Are there errors? Connect your db, type RELOAD ABC at the R> prompt and then go play with the form in the ABC database to see how it behaves. Claudine :)
