So, I'm struggling to figure out why I cannot get a report to print to a
manual feed tray.
This is what I have at the moment...
PRINT Certificate +
WHERE Holder = .vHolder +
OPTION PRINTER +
|SHOW_CANCEL_DIALOG OFF +
|TRAY 3
I have also tried...
|TRAY 1
|TRAY 2
|TRAY Manual Feed
|TRAY 'Manual Feed'
|TRAY Manual Feed in Tray 1 <--
|TRAY 'Manual Feed in Tray 1' <-- exactly as it appears in Windows
printer setup.
But nothing works. The job always pulls from the auto/primary tray holding
standard 8.5x11...
I can't seem to find much documentation on how to use the TRAY option, so
I'm not real sure if I'm just using it incorrectly or if it's broken.
When I do... PRNSETUP TRAYS ...this is what I get...
R>PRNSETUP TRAYS
Available Sources:
Automatically Select
Printer Auto Select
Manual Feed in Tray 1
Tray 1
Tray 2
Tray 3
Unspecified
Plain
Preprinted
Letterhead
Transparency
Prepunched
Labels
Bond
Recycled
Color
Light 60-75 g/m2
Heavy 90-105 g/m2
Cardstock 106-177 g/m2
Light Glossy 75-105 g/m
Glossy 106-120 g/m2
Heavy Glossy 121-163 g/
Tough paper
Envelope
Heavy Envelope
HP Premium Cover 200 g/
HP Color Laser Photo Pa
Matthew Burke
Pioneer Bank - IT Department
Computer Systems Technician
505-627-4415
