That is what I found too. Once BLANK was set to NULL there was no way to change it in RBWIN, only in RBDOS. This seems to be a legacy problem, as it has been that way for some time.
IN RBDOS the changes you make using SET affect not only the environment but the db too. You have to deliberately move to save to change setting in the CFG. IN RBWIN the changes you make do not seem to get saved in the db, instead it wants to save them to the CFG file. Always answer NO unless you want your CFG file corrupted. I keep carefully crafted copies of all my configs on a network drive so if I mess up, I can copy the good one down from the server and just change the internal NAME line. RULE OF THUMB - never change your blank setting for any reason whatsoever. Dennis McGrath ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Bill Downall Sent: Tuesday, March 10, 2009 3:23 PM To: RBASE-L Mailing List Subject: [RBASE-L] - Re: Setting Blank special character Philip, Another possibility is: do you still have R:BASE for DOS 6.5 or later? If so, you should be able to connect to a 7.6 database with that from the menus. press [esc] if you are at a DOS R> prompt. Use the Databases menu to navigate to the folder with the database. select the database. Go to Tools/Settings Go to Characters/Blank type your single space in the "Set to" box. [Esc] until you leave R:BASE for DOS Your change should have now been saved with the database. As long as the new RBENGINE76.CFG file is correct already, you should be good to go from 7.6 Windows. Bill On Tue, Mar 10, 2009 at 4:05 PM, Phillip or Anna Cecil <[email protected]<mailto:[email protected]>> wrote: Thanks, Razzak, but, unfortunately, when I click OK as instructed at the end of step 07, I got the same error "-ERROR- Unrecognized command - retype it ( 40)". Is Rscope the only other option? Thanks, Phillip Cecil ________________________________ From: A. Razzak Memon <[email protected]<mailto:[email protected]>> To: RBASE-L Mailing List <[email protected]<mailto:[email protected]>> Sent: Monday, March 9, 2009 11:39:56 PM Subject: [RBASE-L] - Re: Setting Blank special character At 11:00 PM 3/9/2009, Phillip or Anna Cecil wrote: > The next time I started R:BASE, I got the following error > "Invalid RBENGINE76.CFG command: MENU BLACK ON GRAY" then > I got the the orginal error "Unrecognized command - retype > it ( 40)". I restored RBENGINE76.CFG from backup so I'm > fine as long as I don't open the database with the issue. > Any other ideas? Phillip, Got R:Scope 7.6? If not, follow steps below to create a fresh RBENGINE76.CFG file and then fix the BLANK setting for the database in question: 01. Using Windows Search option, look for RBENGINE76.CFG file. Rename or delete all RBENGINE76.CFG files. 02. Start R:BASE 7.6 for Windows A fresh RBENGINE76.CFG will be created in the "Start in" folder as defined in R:BASE 7.6 shortcut properties. 03. Exit R:BASE 7.6 for Windows 04. Now move the freshly created RBENGINE76.CFG file to \Windows folder 05. Start R:BASE 7.6 for Windows 06. CONNect the database in question using the DB Explorer 07. Type SET at the R> prompt and change the setting for BLANK to space (by pressing once on the space bar) Click on the [OK] button to save Configuration Settings. Figure 1: http://www.rbase.com/rbg76/settings/CharacterSettings.png 08. Alternatively, use R:Scope 7.6 to handle the situation like yours and more ... as illustrated in Figure 2: Figure 2: http://www.rbase.com/rbg76/settings/RScope76.png Hope that helps! Very Best R:egards, Razzak. --- RBASE-L ================================================ TO POST A MESSAGE TO ALL MEMBERS: Send a plain text email to [email protected]<mailto:[email protected]> (Don't use any of these words as your Subject: INTRO, SUBSCRIBE, UNSUBSCRIBE, SEARCH, REMOVE, SUSPEND, RESUME, DIGEST, RESEND, HELP) ================================================ TO SEE MESSAGE POSTING GUIDELINES: Send a plain text email to [email protected]<mailto:[email protected]> In the message SUBJECT, put just one word: INTRO ================================================ TO UNSUBSCRIBE: Send a plain text email to [email protected]<mailto:[email protected]> In the message SUBJECT, put just one word: UNSUBSCRIBE ================================================ TO SEARCH ARCHIVES: Send a plain text email to [email protected]<mailto:[email protected]> In the message SUBJECT, put just one word: SEARCH-n (where n is the number of days). In the message body, place any text to search for. ================================================
