Hello Mike, I finally started with the testing of the connection between Rbase 9.0 64 and Efilm 2.1.2.
It seems that the connection works partially via the RMScript you sent me. I can see the efilm.exe appear in the task manager. BUT : Efilm itself is not activated on the screen. And the parameters Vpunieknummer and Vcon are not passed, I think. So the correct images are not opened in Efilm. All works well with Word and Excel. Any ideas ? Luc Delcoigne ----- Original Message ----- From: "Mike Byerley" <[email protected]> To: "RBASE-L Mailing List" <[email protected]> Sent: Monday, August 09, 2010 4:21 PM Subject: [RBASE-L] - Re: sw: RBG76.EXE - Application Error > If there are other users that I don't want to go to the R>, I use a dialog > asking for a password to the R>. > > ----- Original Message ----- > From: "Michael J. Sinclair" <[email protected]> > To: "RBASE-L Mailing List" <[email protected]> > Sent: Sunday, August 08, 2010 10:40 PM > Subject: [RBASE-L] - Re: sw: RBG76.EXE - Application Error > > > That worked! > Now what would be the best code to put in an EEP if I want to go to the > database > editor/R>? > Basically, I want 2 buttons...one to exit, and another to go the R> or to > the > Database editor screen. > > Mike > > > > > ________________________________ > From: A. Razzak Memon <[email protected]> > To: RBASE-L Mailing List <[email protected]> > Sent: Sun, August 8, 2010 10:17:55 PM > Subject: [RBASE-L] - Re: sw: RBG76.EXE - Application Error > > At 09:47 PM 8/8/2010, Michael J. Sinclair wrote: > > >I use the Rbase.dat file to run the application > > > >G: > >CD G:\RBDATA > >CONNECT dbname > >EDIT USING formname > > > >The form seems to run just fine until I want to exit. > > > >When I click on the Enhanced Speed Button (the name on the > >Button is EXIT), the code that runs is... > > > >CLOSEWINDOW > >DISCONNECT > >EXIT > >RETURN > > > >If I get rid of the word EXIT, the error goes away, but > >then the program does not exit, it goes to the database > >desinger/R> screen. > > > Mike, > > Without knowing all other details, I suggest the following: > > Update the RBASE.DAT file as follows: > > -- RBASE.DAT > G: > CD G:\RBDATA > CONNECT dbname > CLS > EDIT USING formname > IF (CVAL('NetUser')) <> 'MSinclair' THEN > DISCONNECT > EXIT > ENDIF > RETURN > > -- Edit Custom EEP > CLOSEWINDOW > RETURN > > Note: Using the EXIT command in a Variable/TableView based > is not a good idea. EXIT command should not be used from > within an active window, such as form. > > Hope that helps! > > Very Best R:egards, > > Razzak. > > >
