[lightbulb: click!] Wasn't it something to do with MS security and
having to security check every read/write from certain software? That's
all the pieces I can contribute - can somebody put them together? I
think Jan is on the right track.
Doug
On 12/17/2012 2:56 PM, jan johansen wrote:
Frank,
I was just going through that FTE document again myself looking for
that as well.
I know it's some sort of network security issue that I thought was
resolved a long time ago.
In fact that might be the problem.
If the client didn't keep 7.6 up to date and didn't renew then this
might be the problem.
Jan
-----Original Message-----
From: Frank Taylor <[email protected]>
To: [email protected] (RBASE-L Mailing List)
Date: Mon, 17 Dec 2012 20:43:42 +0000
Subject: [RBASE-L] - RE: Slowness with 7.6, revisited
Interesting, I need to go back to the FTE Razzak put out on RBase
and improving speed, was this mentioned or has RBTI looked into
this before? I do remember when working with our Bar Code scanner
vendor using OBDC to connect to our Rbase Database they had
mentioned that could be an issue with their Database in multi-user
mode, but after we installed it on our server, no issue was
there, so we never went further with it. Hmm,I will need to read
more on this again, it’s been a while.
Frank Taylor – Director of Information Technology
F.J. O'Hara & Sons, Inc - Araho Transfer Inc.
Boston, MA - Rockland, ME - Miami, FL
Direct Dial - 617-790-3093
email: [email protected]
<http://mail.whitewolftechnologies.com/cgi-bin/compose.exe?id=01ef7f9322f8a76400dacb6a1fe342bb5a7&new=&xsl=compose.xsl&[email protected]>
*From:* [email protected] [mailto:[email protected]] *On Behalf Of
*Buddy
*Sent:* Monday, December 17, 2012 3:18 PM
*To:* RBASE-L Mailing List
*Subject:* [RBASE-L] - RE: Slowness with 7.6, revisited
Frank
I used this method on a Netware server and everything worked
fine. Never tested it on a Windows server.
Buddy
*From:* [email protected] <mailto:[email protected]>
[mailto:[email protected]] <mailto:[mailto:[email protected]]> *On
Behalf Of *Frank Taylor
*Sent:* Monday, December 17, 2012 1:25 PM
*To:* RBASE-L Mailing List
*Subject:* [RBASE-L] - RE: Slowness with 7.6, revisited
Buddy,
I have read about this before, but I thought corruption issues
were prevalent in Client-Server and ISAM DBMS with it off. Have
you done this in your environments before ? and if so, what
results have you seen on this ?
Frank Taylor – Director of Information Technology
F.J. O'Hara & Sons, Inc - Araho Transfer Inc.
Boston, MA - Rockland, ME - Miami, FL
Direct Dial - 617-790-3093
email: [email protected]
<http://mail.whitewolftechnologies.com/cgi-bin/compose.exe?id=01ef7f9322f8a76400dacb6a1fe342bb5a7&new=&xsl=compose.xsl&[email protected]>
*From:* [email protected] <mailto:[email protected]>
[mailto:[email protected]] *On Behalf Of *Buddy
*Sent:* Monday, December 17, 2012 9:41 AM
*To:* RBASE-L Mailing List
*Subject:* [RBASE-L] - RE: Slowness with 7.6, revisited
Karen
You may want to look at opportunistic locking. This maybe a
start for you http://support.microsoft.com/kb/296264
<http://support.microsoft.com/kb/296264>
Buddy
*From:*[email protected] <mailto:[email protected]>
[mailto:[email protected]] <mailto:[mailto:[email protected]]> *On
Behalf Of *Karen Tellef
*Sent:* Monday, December 17, 2012 8:49 AM
*To:* RBASE-L Mailing List
*Subject:* [RBASE-L] - Slowness with 7.6, revisited
I had posted this question before about a client who runs 7.6 nice
and quick with one person on, then performance slams down as soon
as a second person is attached (takes up to half a minute to [F8]
between rows of a scrolling region, etc). We did an unload
(clean), investigated and found a bunch of mismatched DLLs all
over the place. We uninstalled RBase, deleted every RBase DLL
left out there, reinstalled and updated. Bummer... same thing.
One person is fine, after that no one can move around.
I'm not a hardware or networking person, so any suggestions would
just get passed onto their IT consultant (who the client said "I
wouldn't trust to setup my cell phone"). It had been stressed
to the IT guy to exclude all RBase directories from virus
checking, and they say he claims he did but I have no idea how to
check. Even so, wouldn't the slowness happen even with ONE person
attached if it was a virus checking problem?
Karen
