Aah shucks, ma'am. Twarnt nuthin. -----Original Message----- From: Lena Dammstrom <[email protected]> To: [email protected] (RBASE-L Mailing List) Date: Wed, 10 Apr 2013 09:07:17 -0500 Subject: [RBASE-L] - RE: CLOSEWINDOW
> My apologies - mistyped Johansen - sorry Jan > > From: [email protected] [mailto:[email protected]] On Behalf Of Lena > Dammstrom > Sent: Wednesday, April 10, 2013 9:02 AM > To: RBASE-L Mailing List > Subject: [RBASE-L] - RE: CLOSEWINDOW > > I believe Jan Jonansen gets the KUDOs for mentioning the PAUSE! > > From: [email protected]<mailto:[email protected]> > [mailto:[email protected]] On Behalf Of Jim Belisle > Sent: Wednesday, April 10, 2013 8:41 AM > To: RBASE-L Mailing List > Subject: [RBASE-L] - RE: CLOSEWINDOW > > Thanks everyone for your responses. > When Dennis mentioned the PAUSE command, I remembered having to use > that with some of my pdf reports. > I cleaned up some useless code from before 9.5 days and things seem to > be smoother. > > Jim > > From: [email protected]<mailto:[email protected]> > [mailto:[email protected]] On Behalf Of Dennis McGrath > Sent: Tuesday, April 09, 2013 3:58 PM > To: RBASE-L Mailing List > Subject: [RBASE-L] - RE: CLOSEWINDOW > > How much memory in the computer? > > > Dennis McGrath > [email protected]<mailto:[email protected]> > [email protected]<mailto:[email protected]> > > On Tue, Apr 9, 2013 at 3:55 PM, Jim Belisle > <[email protected]<mailto:[email protected]>> wrote: > Jan, > > I am going to try a PAUSE FOR whatever at the end of the while and see > if that may help. > > Jim > > -----Original Message----- > From: [email protected]<mailto:[email protected]> > [mailto:[email protected]<mailto:[email protected]>] On Behalf Of jan > johansen > Sent: Tuesday, April 09, 2013 3:53 PM > To: RBASE-L Mailing List > Subject: [RBASE-L] - RE: CLOSEWINDOW > > I've had a couple of instances where I needed to "slow down" > R:BASE processing by adding PAUSE statements in while loops. > > > -----Original Message----- > From: "Jim Belisle" <[email protected]<mailto:[email protected]>> > To: [email protected]<mailto:[email protected]> (RBASE-L Mailing List) > Date: Tue, 9 Apr 2013 15:39:43 -0500 > Subject: [RBASE-L] - RE: CLOSEWINDOW > > > Dennis & others, > > > > I had to step away for most of the day so just got back to your > > suggestions. > > I believe you may have hit on something, Dennis. > > > > The only machine this is happening on is a VISTA machine using an > > older laser printer. > > I have thought for some time that it is more of a memory issue. > > If the two (computer and printer) are communication too slowly, then > > maybe the printing is not finishing prior to the CLOSEWINDOW. > > If the spooling is not fast enough, I can see how that could be the > > case. > > The printer has 64M of ram but these days, that may not be enough. > > When I run the same form on my machine, I have not had this problem. > > Also shipping has told me the reports come out VERY slooowly. > > > > I have run RSTYLE and everything is fine there. > > > > Is there something else I may be missing? > > This will be good information for my lobbying for a newer computer > for > > > shipping. > > > > Jim > > > > > > -----Original Message----- > > From: [email protected]<mailto:[email protected]> > [mailto:[email protected]<mailto:[email protected]>] On Behalf Of > Dennis > > > McGrath > > Sent: Tuesday, April 09, 2013 8:46 AM > > To: RBASE-L Mailing List > > Subject: [RBASE-L] - RE: CLOSEWINDOW > > > > Your CLOSEWINDOW is in the right place. > > CLOSEWINDOW will not work if other code is still running. > > > > Did you RSTYLE the code? > > > > > > Dennis McGrath > > Software Developer > > QMI Security Solutions > > 1661 Glenlake Ave > > Itasca IL 60143 > > 630-980-8461<tel:630-980-8461> > > [email protected]<mailto:[email protected]> > > -----Original Message----- > > From: [email protected]<mailto:[email protected]> > [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Jim > > Belisle > > Sent: Tuesday, April 09, 2013 7:19 AM > > To: RBASE-L Mailing List > > Subject: [RBASE-L] - CLOSEWINDOW > > > > > > > > I have a form that does not always close after some reports have > > printed. > > > > These reports print within a WHILE LOOP. > > > > At the present time, the CLOSEWINDOW is the last line before the > > RETURN. > > > > > > > > If I put this command before my DROP TEMP commands will all those > > commands still work? > > > > In other words, will all the code after the CLOSEWINDOW command still > > fire all the way to the RETURN? > > > > > > > > These reports do eventually print but the users have to hit another > > button to clear the form. > > > > I just want the CLOSEWINDOW command to work all the time. > > > > > > > > James Belisle > > > > > > > > Making Information Systems People Friendly Since 1990 > > > > > > > > > > > > > --- RBASE-L ================================================ TO POST A MESSAGE TO ALL MEMBERS: Send a plain text email to [email protected] (Don't use any of these words as your Subject: INTRO, SUBSCRIBE, UNSUBSCRIBE, SEARCH, REMOVE, SUSPEND, RESUME, DIGEST, RESEND, HELP) ================================================ TO SEE MESSAGE POSTING GUIDELINES: Send a plain text email to [email protected] In the message SUBJECT, put just one word: INTRO ================================================ TO UNSUBSCRIBE: Send a plain text email to [email protected] In the message SUBJECT, put just one word: UNSUBSCRIBE ================================================ TO SEARCH ARCHIVES: Send a plain text email to [email protected] In the message SUBJECT, put just one word: SEARCH-n (where n is the number of days). In the message body, place any text to search for. ================================================
