Javier,
I have done the same as Tom. Get any USB scanner set up for RFID scanning. Click the field you want the scan to goto(must be at least as long as barcode), aim and click the scanner at the barcode, result should go directly into field.
Hope this helps.
Bill Eyring
-------- Original Message --------
Subject: [RBASE-L] - Re: RFID Tags and USB readers
From: "Javier Valencia" <[email protected]>
Date: Mon, May 20, 2013 5:31 pm
To: [email protected] (RBASE-L Mailing List)
I will definitely look into this and post result when available.
Javier,
Javier Valencia, PE
O: 913-829-0888
H: 913-397-9605
C: 913-915-3137
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of A. Razzak
Memon
Sent: Monday, May 20, 2013 6:59 PM
To: RBASE-L Mailing List
Subject: [RBASE-L] - Re: RFID Tags and USB readers
At 06:26 PM 5/20/2013, Javier Valencia wrote:
>Thanks R:azzak,
>
>Do you have write up on how to connect a USB or Blue Tooth device to
>R:Base; it would help me greatly. I have a handheld Samsung XP computer
>that I could use in the field to read RFID tags.
Javier,
Technically, if the USB or Blue Tooth device is installed & configured
correctly, you should be able to use the device as "Keyboard Input" options
when scanned.
You may contact the manufacturer for updated device drivers, product
manuals, and instructions on how to use USB or Blue Tooth device as
"Keyboard Input" option.
Very Best R:egards,
Razzak
www.rbase.com
www.facebook.com/rbase
