Mike, Can you provide more details? As you know, the first thing you do before any major or even minor change is to make sure you have good and working backups; do you have good backups? Can you copy the original database from your backup? Do you have both version of the database? As Karen mentioned, you should still have version 9.5 installed since the new one does not erase or replace the old one and you can access the backup version of your database Do both database versions have the same name? Is your application compiled? Does it have the correct database name and access privilege as the old? You might try connecting to the database directly without owner or password (if the old one has one); I seem to recall that when I did the conversion the owner and password were gone and I had to enter them again There is a very detailed procedure to do the conversion that R:azzak posted and I believe it is also available on line; did you follow all the steps? Perhaps with the additional information we can be of more help. Javier, Javier Valencia, PE O: 913-829-0888 H: 913-397-9605 C: 913-915-3137 From: [email protected] [mailto:[email protected]] On Behalf Of Karen Tellef Sent: Thursday, January 21, 2016 10:00 AM To: [email protected] Subject: [RBASE-L] - RE: 9.5 SUPPORT You should still have 9.5 64 installed on your system. The X install wouldn't have removed it.
Karen -----Original Message----- From: mike epstein sony viao office < <mailto:[email protected]> [email protected]> To: karentellef < <mailto:[email protected]> [email protected]> Sent: Thu, Jan 21, 2016 9:56 am Subject: [RBASE-L] - RE: 9.5 SUPPORT DAN I HAVE MY APPLICATION NAMED PLUMBER (9.5 64 ) THE NEW APPLICATION IS PLUMBERXE . THE PLUMBER APPLICATION WILL NOT CONNECT TO THE DATA BASE (PLUMBER.RX1) I THINK I NEED A LINK TO GET 9.5 64 I HAVEN’T BEEN ABLE TO GET JOHN ON THE PHONE. From: <mailto:[email protected]> [email protected] [ <mailto:[email protected]?> mailto:[email protected]] On Behalf Of Dan Goldberg Sent: Thursday, January 21, 2016 9:39 AM To: <mailto:[email protected]> [email protected] Subject: [RBASE-L] - RE: 9.5 SUPPORT I am not sure but the unload all should work. Out db.all Unload all Out scr Rename the database Run db.all Dan Goldberg From: <mailto:[email protected]> [email protected] [ <mailto:[email protected]> mailto:[email protected]] On Behalf Of mike epstein sony viao office Sent: Thursday, January 21, 2016 7:26 AM To: Dan Goldberg Subject: [RBASE-L] - 9.5 SUPPORT I HOPE SOMEONE CAN HELP ME . I TRIED TO MIGRATE TO XE AND SCREWED UP. IS IT POSSIBLE TO GO BACK TO 9.5 ? IF SO WHAT WOULD BE THE PROCEDURE. AT THIS MOMENT MY BUSINESS IS AT A STAND STILL, PLEASE HELP MIKE Epstein
