|
Eureka!
HKey_Current_User\Software\R:Base
Technologies\RBG7\Data Dictionary
had a value for "Top" of "ffffc6a0" =
4294952608
I changed it to 100 hoping that it represented pixels -
my screen is not that big <g> and now I can see the DD again.
Thanks to everybody for your help,
Regards,
Alastair.
----- Original Message -----
Sent: Wednesday, June 15, 2005 7:28
AM
Subject: [RBG7-L] - Re: Strange Data
dictionary problem
Thanks Doug - no, unfortunately the DD is not shown as
a separate task.
However, I presume that R:Base stores the last size
& position somewhere so I am about to search the registry and then any ini
files that I can find to see if I can find something to
"correct".
I'm not convinced that somehow it has got "off-screen"
but it is the only possibility that I've got to go on at the moment so any
other help/suggestions is greatly appreciated.
Regards,
Alastair.
----- Original Message -----
Sent: Wednesday, June 15, 2005 12:49
AM
Subject: [RBG7-L] - Re: Strange Data
dictionary problem
Alastair, if you bring up the task list with Ctrl-Alt-Del, is
the RB DD listed? If it is, try right-clicking on
it and see what
options there are. I'm not at a W98 machine right now but Win2K has
minimize, maximize, bring to front &
some other options. Maybe
if the DD is off-screen this will help you locate it.
If the RB DD isn't
listed, well, then I'll check some old W98 ref material and see what else
might help.
Regards,
Doug
Alastair Burr wrote:
Thanks Albert, & Javier, but I don't think your suggestions are the answer -
even though I have tried them.
What has just crossed my mind after all but re-installing W98SE is that I
had a problem about a week ago when another program somehow got minimised
and moved outside the normal screen area.
I managed to retrieve it by using the re-size option when it showed on the
toolbar. Don't ask how it's possible but I could minimise and restore the
program but not maximise it - something like that.
If the Data dictionary was open at that same time it is possible that it is
being displayed but not where I can see it. That also seems to tie in with
[Esc] working to return control to R:Base.
However, the DD doesn't show on the toolbar so does anybody have any
suggestions how I could see if this is what's happening and/or do anything
about it?
Again, thanks for all the suggestions,
Regards,
Alastair.
----- Original Message -----
From: "Albert Berry" <[EMAIL PROTECTED]>
To: "RBG7-L Mailing List" <[email protected]>
Sent: Tuesday, June 14, 2005 5:17 PM
Subject: [RBG7-L] - Re: Strange Data dictionary problem
Another thought, Alastair - have a look for spurious RBE* files. Move
everything into the program
directory and start R:Base with the -a switch to make sure it uses the
correct ones.
--- Alastair Burr <[EMAIL PROTECTED]> wrote:
Over the last few days, maybe a week, whenever I press [F3] to display
the data dictionary the
screen flashes the dictionary briefly then appears to "hang". Pressing
[Esc] clears the "hang".
It happens with all databases.
I've tried reloading the databases as well as re-installing my last
upgrade but neither resolves
the problem.
I have also checked for any redefined keys but as the data dictionary
does start I presume that
is not the cause - and I couldn't find any changes anyway.
Obviously, as this has been working forever, something must have changed
on my system but does
anybody have any ideas what else I could look for, please?
Thanks in advance & regards,
Alastair.
----------------------------------
A D B Burr,
St. Albans, UK.
----------------------------------
[EMAIL PROTECTED]
----------------------------------
Albert Berry
Management Consultant
RR2 - 1252 Ponderosa Drive
Sparwood BC, V0B 2G2
Canada
(250) 425-5806
(250) 425-7259
(708) 575-3952 (fax)
[EMAIL PROTECTED]
|
