Razzak,
Followed your directions and it is working great.
Thank you,
Steve
-------------- Original message --------------
> At 09:05 PM 9/12/2005, Steve Vellella wrote:
>
> >I have a Doctors office that is trying to print chart labels.
> >Their okidata dot matrix wouldn't work at all - tried Labels
> >in rbase and tried Reports. They bought a thermal printer that
> >prints sideways (Dymo labeler) - Rbase won't print to it
> >sideways.
>
>
> Steve,
>
> Have you seen the License Key Labels printed on the inside of
> the DVD case of R:BASE 7.1 and 7.5 for Windows?
>
> Those labels are printed on a Dymo LabelWriter 330 Turbo-USB
> printer.
>
> It all has to do with the DYMO LabelWriter printer setup.
>
> To print one label at a time (sideways) on the roll, you need
> a printer to support labels on a roll, such as DYMO LabelWriter
> 330 Turbo-USB.
>
> If that is the case, first you need to set up the printer, and
> then use the "Custom" Paper Size option of Label > Page Setup.
>
> Here are a few tips (based on my experience using Dymo LabelWriter
> with "R:Capture", the first vertical market RBG7 application):
>
> http://www.rcapture.com
>
> 01. By default, the Dymo Label Printer is installed for "Portrait"
> Printing. You need to change the printer default to print as
> "Landscape".
>
> Here's how:
>
> If installed properly on Windows 2000/XP Workstation, you
> should be able to see the DYMO LabelWriter 330 Turbo-USB as
> one of the listed printer in Windows Printer Configuration
> Panel.
>
> Start | Settings | Printers
>
> You'll need to update the Printing Preferences of DYMO
> LabelWriter 330 Turbo-USB printer as following:
>
> 01. Right-Click on DYMO LabelWriter 330 Turbo-USB printer icon
> 02. Select Printing Preferences...
> 03. Change Orientation to Landscape
> 04. Click on [Advanced] button for Advanced Properties
> 05. Change the properties as following:
> Paper Size: 99014 Shipping
> Copy Count: 1 Copy
> Advanced Printing Features: Enabled
> Halftoning: Super Cell
> Printer Quality: Barcodes and Graphics
> Print Quality: Normal
>
> Click on [OK] when done.
>
> 06. Click on [Apply] button to save and then click on [OK]
> to save Printing Preferences.
>
> 02. Once the printer is setup accordingly, now you can use the
> R:BASE 7.5 for Windows Labels to print one label at a time
> on a roll!
>
> 03. Use "Custom" option to set the height and width of the label.
>
> That's all there is to it.
>
> Enjoy and make sure to have fun!
>
> Very Best R:egards,
>
> Razzak.
>
