On Thu, Jan 22, 2009 at 10:09 AM, Jim Thill - Hiawatha Cyclery <[email protected]> wrote: > On the other hand, many such centerpull cable stops actually attached > under either end of the seatpost binder bolt (rather than in the > middle). You'd have to get clever to make one of these work with Riv's > recessed seat binder bolts. Also, these are usually unsightly, IMO.
Since Rivendell uses a standard bolt and nut, you could probably do a slightly offset hanger by using a longer bolt in the seatpost binder. You'd tighten the binder bolt as usual, then add the hanger, then a locknut outside of that just to hold the hanger in place. It might be too far off-center if you're on a small frame, but worth a try. -- Bill Connell St. Paul, MN --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en -~----------~----~----~----~------~----~------~--~---
