Doug, You will probably need to leave the part of the stem that goes inside the steerer tube unpowdercoated. With the additional thickness of the powder coating (which can be quite thick) it may not fit anymore.
I have a well used Nitto Pearl 10cm if you are interested... Angus On Jan 22, 11:04 pm, Doug Van Cleve <[email protected]> wrote: > Howdy folks. > > There is a guy that powder coats stuff cheap nearby, and I am curious about > how well an alloy quill stem would turn out. Rather than risk a basically > new Nitto that I have now, I would like to find one that is well used but > not too abused. I figure I can sand out some scratches on the quill and it > should look as good as new after the powder coat. Anybody have such a stem, > a Tech. Dlx. in 10cm extension? > > Thanks, Doug > > P.S. I want a black stem in case you're curious :^) --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en -~----------~----~----~----~------~----~------~--~---
