Hey Angus, Thanks for the offer. How much shorter is the quill on a Pearl? Perhaps the better question is how far from the min. insert line to the bottom of the forward extension? So far no offers for a Tech Dlx...
Regards, Doug P.S. The powdercoater said he has had great luck doing stems and that he goes light on the part that will be in the steerer. On Fri, Jan 23, 2009 at 3:33 AM, Angus <[email protected]> wrote: > > Doug, > > You will probably need to leave the part of the stem that goes inside > the steerer tube unpowdercoated. With the additional thickness of the > powder coating (which can be quite thick) it may not fit anymore. > > I have a well used Nitto Pearl 10cm if you are interested... > > Angus > > On Jan 22, 11:04 pm, Doug Van Cleve <[email protected]> wrote: > > Howdy folks. > > > > There is a guy that powder coats stuff cheap nearby, and I am curious > about > > how well an alloy quill stem would turn out. Rather than risk a > basically > > new Nitto that I have now, I would like to find one that is well used but > > not too abused. I figure I can sand out some scratches on the quill and > it > > should look as good as new after the powder coat. Anybody have such a > stem, > > a Tech. Dlx. in 10cm extension? > > > > Thanks, Doug > > > > P.S. I want a black stem in case you're curious :^) > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en -~----------~----~----~----~------~----~------~--~---
