Just make sure the wedge is down past the threaded portion of the steerer. On Rivendell frames the threaded portion is long, so just to be on the safe side you might want to hold the stem next to the HT and visually see how high the stem can be, and mark it yourself with a sharpie or some tape.
On Monday, May 25, 2015 at 8:18:08 PM UTC-4, drew wrote: > > Regarding minimum insertion line. does the minimum insertion line mean > 'this far below the headset" or "below the locknuts" or "if you cant see > the line, you're good"? ive got about 5cm in below the headset, and > another 5cm taken up by locknut/cable hanger/spacer > too little? > > father's day present bike building requires way high bars and even a > technomic is looking too short. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
