Hey Bob B, I used Elmer's Craft Bond spray adhesive (sparingly) to secure the felt to the bar, and then I wrapped twine around it while the adhesive set to make sure the felt was contacting all around and it stayed put. It's held up very well in the year I've had it on -- it hasn't slipped a bit, I like the slightly larger diameter of the grip (compared to just cotton tape on the bar), and I like the little bit of cush provided by the felt.
Bob E On Monday, March 27, 2017 at 7:08:06 PM UTC-4, Bob B wrote: > > Hey Bob, I tried this method on my Boscos and I couldn't get the felt to > keep from slipping around the bars as I taped it. Did you have to glue the > felt in place first? I thought about that, but then thought it would be too > much of a mess if I ever wanted to reconfigure the bars... > > On Sunday, March 26, 2017 at 9:27:29 PM UTC-4, Bob Ehrenbeck wrote: >> >> I have the Bosco Bullmoose bar on my Clem. >> >> For grips, I wrapped some cotton bar tape over a layer of felt (a la >> Riv). >> >> https://flic.kr/p/Evy9hj >> >> Bob E >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
