Unless you are going for a super upright riding position, I don't see why the bullmoose wouldn't work on your Atlantis. The Whatbar? site shows the grip portion of the bullmoose coming further back than the the center of the head tube. I've ridden a bike with a 60cm ETT (10 less than the Atlantis) and my normal MTB bars are well forward of the head tube. If anything, I would worry about the bullmoose being too close to me.
On Wednesday, February 26, 2020 at 1:52:00 PM UTC-6, Steve Cole wrote: > > > When I ordered my MIT Atlantis (a 55cm, 700c), I also wanted a slightly > swept back bar. I spec'd the Nitto Bullmoose but was told by James Johnson > at Analog Cycles (which is building the bike for me) that the Bullmoose > would not work for what I wanted because of the long reach of the MIT > Atlantis. He recommended a shorter stem (80mm) and either a Nitto Wavie or > Velo Orange Curvy handlebar. These are similar in most respects and I've > ended up with the Curvy. I'll be riding it in a few weeks and can let you > know my experience. > > Albastache? > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/fdeb7866-4fda-4f36-9ff1-7c03bd4b33ed%40googlegroups.com.
