Thanks again Garth, I thought it had to be centered. On Tue, Jul 28, 2020 at 4:42 AM Garth <garth...@gmail.com> wrote:
> > Joel, yes you have a spacer between the lock nut and cone on the left, > but *also on the right*, under where the FW is placed. To lengthen the > inside width of the assembly from lock nut to lock nut equidistantly, you > need the longer axle(in this case solid), an extra 4.5mm of spacers added > to *both sides, *and the bolt-on nuts. The spacer(s) need not be one > solid unit, you can mix and match. > > > > > > > On Monday, July 27, 2020 at 5:07:18 PM UTC-4, Joel Stern wrote: >> >> Garth, my Bleriot wheels were built up with a Superbe Pro rear hub, what >> could that have been, 126mm? I measured spacers on the left side and it >> seems to be 5mm, >> > > >> *so what am I not seeing?* >> >>> >>> >>> -- > You received this message because you are subscribed to a topic in the > Google Groups "RBW Owners Bunch" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/rbw-owners-bunch/pEwGF4S1Xz0/unsubscribe > . > To unsubscribe from this group and all its topics, send an email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/ebd30d96-11c6-4464-bf25-f502062ca9f0o%40googlegroups.com > <https://groups.google.com/d/msgid/rbw-owners-bunch/ebd30d96-11c6-4464-bf25-f502062ca9f0o%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- ~IMPORTANT~ Note to all~~ EMAIL ETIQUETTE If you forward this email, please highlight and delete the forwarding history, which includes my email address and maybe others. It is a courtesy to me and others who may not wish to have their email addresses sent all over the world. Erasing the history helps prevent Spammers from obtaining addresses, prevents viruses from being propagated, and limits the proliferation of spam. Also, please use the “BCC” area instead of “TO” and “CC” when forwarding to several people at once. ~~Thank you~~ -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/CAPjfky-ZfSzSxHfY0DAJ8Jvr3ZUP4ZKc%3DZ_nuNCUBXRKZDSYnQ%40mail.gmail.com.
