Oooooh, thanks for that Mackenzy !
I have the original 56cm steel Albatross bar and I love 'em. I tried some of the 55 Al ones and it was notably different, the radius of the curve was smaller and I didn't like it one bit. I acquired a Billie bar recently and it was quite a downer. Sure, it's wider at the ends, but the radius of the curve is very small and the width of the bar is very narrow there, more so than a Alba. If you limit your hand position to the ends that's fine, but if like me you want to use it's full length back/forward it doesn't work so good. The whatbars website overlay between a Alba and Billie isn't accurate, at least with the 56 Alba. So yes, if anything the Alba could use a widening ! I also prefer the steel bars as I can use bar end brake levers. I'll contact Doom Bars and see what he can do. I'll gladly pay $100 for a custom wider Alba bar. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/4b848dbb-32a6-4c35-b6d5-cd7d6e75abcco%40googlegroups.com.