Looks like your pic was posted at the same time I was typing this reply. Looks like the 110-113 bb is what is needed.
Good luck with the build. Thanks, Reggie On Sunday, December 4, 2022 at 11:26:42 AM UTC-6 R. Alexis wrote: > Hey Jacob, > > You say: > > "I'm using a triple crankset (42/32/22 Ritchey)" and state it is a 110 > bcd. From the ring sizes and the bottom bracket, it would seem that this is > a 94/58 or 56 BCD crank. Lowest you can probably get the middle on a 110 > bcd is 34 usually, possibly heard of a 33 and the smallest on the granny is > a 24. > > I have two bikes with the Ritchey 110/74 and most of my fleet is running a > 110/74 bcd of some type with the exception of possibly a couple. > > Thanks, > > Reginald Alexis > > On Saturday, December 3, 2022 at 6:11:56 PM UTC-6 jacob...@gmail.com > wrote: > >> I just checked and it’s a 110 BCD on the big ring. I’ve got just under >> .5” of clearance if I’m in the small/ big combo. So I should be fine >> swapping in a narrower BB. >> >> I’ll see about picking up one of the m737 or m563’s >> >> Thanks for the help! >> >> Cheers, >> >> Jacob >> >> >> Sent from my iPhone >> >> On Dec 3, 2022, at 6:46 PM, Justus G <cjus...@gmail.com> wrote: >> >> If you look for a good condition old stock XT M737 or LX M563 you should >> have a perfect match for your ring sizes, a small/short enough cage to not >> hit the stays and enough range for the triple. I am currently using this >> setup with a 110/74 Ritchey Triple that I run with a Phil ~119mm BB. But >> you may not need a new FD anyway. >> >> >> Is your crankset the Ritchey Logic 94/58 Compact? If so, that is meant >> to be run with a 110-113mm BB so if that is the case my concern is you are >> out of range due to the extra length which will also effect chainline. >> >> My recommend is to measure and see if a 113mm BB will work (need 5mm vs >> what you have now to tire) and go to that. Perfect chainline. Great >> Q-factor. Prefect. >> >> >> On Saturday, December 3, 2022 at 4:57:38 PM UTC-6 jacob...@gmail.com >> wrote: >> >>> Hello good people, >>> >>> I'm finishing up my Gus build and the front derailleur from my stash >>> doesn't work. I'm using a triple crankset (42/32/22 Ritchey) with a 123mm >>> bottom bracket. 9 speed in the back and a 2.25" rear tire. >>> >>> I actually bought a Shimano FD-M780 but it was the braze on style >>> (mistake on my part). When I got the clamp in and everything mounted it >>> didn't seem to have enough throw to push into the big ring. I'm pretty >>> confident I had everything installed correctly. >>> >>> The Skeleton Key FD on Riv says a 118mm BB. >>> >>> If I change the BB to something narrower will I run into tire clearance >>> issues? I don't plan on going larger but it would be nice to have the >>> option. >>> >>> Thanks for any insight! >>> >>> Cheers, >>> >>> Jacob >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "RBW Owners Bunch" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to rbw-owners-bun...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/rbw-owners-bunch/b8d54474-fb6f-46a9-a187-9a30254d9986n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/rbw-owners-bunch/b8d54474-fb6f-46a9-a187-9a30254d9986n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/78e5261f-face-44ea-b346-8d98e628e416n%40googlegroups.com.
