Since the Quickbeam has a nice, built-in cable hanger at the rear (whereas the Simple One relies on an ad-on hanger installed at the seatpost clamp bolt), I think it's nice to use canti brakes. Just my opinion. I had wide profile brakes, like the neo-retro, both front and rear on my Quickbeam (and will again when I finish rebuilding it) and never had heel clearance problems. I do have another bike where I needed to use the touring on the rear with the neo retro on the front.
On Wednesday, January 11, 2023 at 12:01:17 PM UTC-7 eliot...@gmail.com wrote: > Why not do the motolite V brakes ? I bet they rock > > On Wed, Jan 11, 2023 at 10:19 AM Drew Henson <drewh...@gmail.com> wrote: > >> Also depends on if you want to run fenders. I don't think the minimotos >> have all that much clearance depending on tire size. >> >> On Wednesday, January 11, 2023 at 10:06:49 AM UTC-8 JohnS wrote: >> >>> Thank you Mark, good to know. >>> >>> On Wednesday, January 11, 2023 at 1:04:13 PM UTC-5 esoter...@gmail.com >>> wrote: >>> >>>> John, >>>> >>>> The Paul Minomotos are actually short-pull calipers, so you can use the >>>> same short-pull levers that you would use with the touring/neo-retro >>>> cantilevers. The Paul Motolites are the ones that use long-pull levers. >>>> >>>> ~Mark >>>> Raleigh, NC >>>> >>>> >>>> On Jan 11, 2023, at 12:57, JohnS <shar...@gmail.com> wrote: >>>> >>>> The "are Paul's brakes worth it thread" got me thinking that I should >>>> give them a try on my Quickbeam. What do people have experience with? I >>>> like the idea of using touring canti's on the rear and minimotos on the >>>> front as seen on this Rock Lobster build over on The Radivist. >>>> >>>> >>>> >>>> https://theradavist.com/cyclofunk-single-speed-rock-lobster-cyclocross-kyle-kelley/ >>>> >>>> The only problem with that is, I'll have to get two pairs of brake >>>> levels, one short pull and one long pull. I'm planning on using >>>> Mark/noodle >>>> drop bars, so the Tektro R340 and RL520 brake levers are at reasonably >>>> priced at $30/pair. >>>> >>>> Any suggestions are appreciated, >>>> JohnS >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "RBW Owners Bunch" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to rbw-owners-bun...@googlegroups.com. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/rbw-owners-bunch/8fdc7e95-aa10-446d-97ec-695316b217d2n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/rbw-owners-bunch/8fdc7e95-aa10-446d-97ec-695316b217d2n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>>> -- >> You received this message because you are subscribed to the Google Groups >> "RBW Owners Bunch" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to rbw-owners-bun...@googlegroups.com. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/rbw-owners-bunch/5f794274-b912-4cd8-b60b-3c2b14dcde6bn%40googlegroups.com >> >> <https://groups.google.com/d/msgid/rbw-owners-bunch/5f794274-b912-4cd8-b60b-3c2b14dcde6bn%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/86dc299d-ab40-4348-b213-594a8b0338f1n%40googlegroups.com.
