I could not find one there. My LBS can handle this so for now that will do the trick.
Larry Powers Get a bicycle. You will not regret it if you live. - Mark Twain > Date: Thu, 24 Jun 2010 09:43:27 -0700 > Subject: [RBW] Re: SUZUE Bearing Replacement > From: [email protected] > To: [email protected] > > > > On Jun 23, 8:00 pm, Larry Powers <[email protected]> wrote: > > I had a wobble in the rear wheel of my Quickbeam. I found that the nuts on > > one side were loose and thought it would be an easy fix. Even after > > tightening the nuts there was still a bit of a wobble so it is time to > > replacement bearings. > > > > I pulled off the nuts on both sides and the dust cover on one side so I > > could see the bearings. What next? How do I extricate the bearings? Last > > wheel I worked on had cup and cone bearings and the Park tool website did > > not have a description of how to remove cartridge bearings. > > > > Thanks in advance. > > > > Larry Powers > > > > > Suzue/.Sunshine/Suntour sealed bearing hubs required a special tool to > pull the bearings that Loose Screws used to sell. Do they still? Good > question. > Phil Brown > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > _________________________________________________________________ Hotmail has tools for the New Busy. Search, chat and e-mail from your inbox. http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_1 -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
