> If you look at a regular non pinned chainring compared to the pinned > ones, you'll see the ramps are set so high, close to the teeth, that > your range of use is limited. I was told I'd have no issue with using > a 8sp chain with these ..... oops ..... live and learn.
I have TA Chainrings on all my bikes. I believe my chains are all 8 speed Wipperman. I have no problem with shifting on any of them. > At this point I don't know if it's the BB or the crank, or the > connection of the two at the tapers. Are you sure the BB is JIS taper? Assuming it is, there should not be any wiggle to cause a click. On Aug 4, 3:26 pm, Garth <[email protected]> wrote: > I use 7sp friction shifting Joel. I've never used indexed shifting. > If you look at a regular non pinned chainring compared to the pinned > ones, you'll see the ramps are set so high, close to the teeth, that > your range of use is limited. I was told I'd have no issue with using > a 8sp chain with these ..... oops ..... live and learn. > > At this point I don't know if it's the BB or the crank, or the > connection of the two at the tapers. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
