I wouldn't get too panicked. It could just be the brake bolt, or the daruma. Check out this rust bucket....
http://www.flickr.com/photos/vikapproved/5558127178/ A few miles on that bike. The names written on it are places he's been. On Mar 25, 1:25 pm, Patrick in VT <[email protected]> wrote: > On Mar 25, 3:29 pm, Rob <[email protected]> wrote: > > >Never overhauled a bottom bracket before. > > and you won't need to with a sealed bearing bb - just pull it out (as > you'll want to anyway when applying the framesaver), clean the bb > shell and cups, regrease and install. good to go. > > >Not even quite sure how to get these TA Pro Vis cranks off! > > ahh, the hidden cost of the TA "cyclotouriste." you'll need a puller > with 23mm threading. not the cheapest tool, so try to find a used > one. or make pals with somebody who has one. or go to shop that works > on older bikes. I recall a review in an issue of BQ where the electra > "ticino" cranks were compared to the TA's on a cost basis - the cost > of a new puller ($50 or so) for the TA's should have been included > because most folks who have newly acquired the TA don't have this > tool. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
