Just took some measurements. I think those struts are too short. I think you need more like 160-180 depending on the bike.
I was thinking about trying this on one of my bikes and then gave up. Went with p-clamps instead. Dan SF On Aug 23, 2012, at 3:19 PM, Joe Bunik <jbu...@gmail.com> wrote: > Gang, > > I should just ask the crew, but figure the knowledge is in here as well... > > Is it functionally possible to set up a Mark's Rack on a canti-bossed > (and non-midfork-eyelet) bike without resorting to p-clamps? E.g., > using "Campee" struts > (http://www.benscycle.net/index.php?main_page=product_info&products_id=7978) > and diving board to the fork crown? > > Thanks > =- Joe Bunik > Walnut Creek, CA > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > To unsubscribe from this group, send email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
