Keeps ya healthy! I actually only use about 1-1.5 oz in the 700c / 26x1 tubes. I have a Stanz quart jug that I dispense into a 2oz squeeze bottle with a yorker cap. I cut the tip off the yorker so it essentially threads down onto the valve stem. I barely file the top off the valve stem so I can remove the nut, let the core drop down just inside the tube and squirt the sealant in while pinching the core to prevent it from falling into tube. I do all this with the tube laying flat on the table so if the core falls all the way out of the stem into the tube it's easy to work back into place. I can do a set of tubes in @ 10 minutes. I also dig into the wifes nailpolish and paint a stripe on the valve stem just below the cap so I know I've sealed it. I rinse out the 2oz bottle and just reuse it for the next set.
On Saturday, March 23, 2013 9:38:50 AM UTC-6, [email protected] wrote: > > I love a Stout for breakfast! > > Thanks for the feedback on your process.I've been thinking about it, but > haven't done it as I don't want to have to keep up on yet another set of > wheels. But annually I could probably pull off :-) > > 2 oz fill like regular Stan's? > > Cheers, > David > Redlands, CA > > ** > "Censorship is telling a man he can't have a steak just because a baby > can't chew it." -*Mark Twain* > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en-US. For more options, visit https://groups.google.com/groups/opt_out.
