My experience is the same as Dans - been through it with two different
bikes. Bob


On Thu, Apr 11, 2013 at 2:39 PM, Dan Abelson <d...@abelsons.net> wrote:

> I would look at the silver shifters first. In my experience unless you set
> the cable tension pretty high they tend to cause skipping.
>
> Dan Abelson
> St. Paul MN
> On Apr 11, 2013 11:22 AM, "Doug M" <yengamg...@gmail.com> wrote:
>
>> Submitted for your consideration:  a crunchy drivetrain problem on my
>> new Hilsen build.  I’m experiencing some auto-shifting and cog skipping
>> when going uphill, pedaling hard or pedaling out of the saddle.  I’d
>> appreciate the group’s suggestions for a solution.******
>>
>> Frame: 65 AHH, Waterford, 135 spacing, 1 TT, new****
>>
>> Crank: Sugino XD2 road double 48-34****
>>
>> BB: Shimano UN-54, 110 mm****
>>
>> Shifters: Silvers on bar ends****
>>
>> RD: Shimano LX, low normal****
>>
>> Rims: Sun CR-18, 36 hole****
>>
>> Rear hub: Shimano 105, 130 spacing, a 1.5 mm spacer added to each side***
>> *
>>
>> Cassette: SRAM 8 speed, 11-32****
>>
>> Chain: SRAM 7-8 speed, new****
>>
>> Components not indicated as new have maybe 200 mi. of use on a previous
>> bike of mine.****
>>
>> ** **
>>
>> Me: 6’3”, PBH 92, 265 lbs.  What I’ve tried:  Grease on BB cable guide,
>> tightening rear QR skewer more. No luck so far.****
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "RBW Owners Bunch" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to rbw-owners-bunch+unsubscr...@googlegroups.com.
>> To post to this group, send email to rbw-owners-bunch@googlegroups.com.
>> Visit this group at
>> http://groups.google.com/group/rbw-owners-bunch?hl=en-US.
>> For more options, visit https://groups.google.com/groups/opt_out.
>>
>>
>>
>  --
> You received this message because you are subscribed to the Google Groups
> "RBW Owners Bunch" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to rbw-owners-bunch+unsubscr...@googlegroups.com.
> To post to this group, send email to rbw-owners-bunch@googlegroups.com.
> Visit this group at
> http://groups.google.com/group/rbw-owners-bunch?hl=en-US.
> For more options, visit https://groups.google.com/groups/opt_out.
>
>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en-US.
For more options, visit https://groups.google.com/groups/opt_out.


Reply via email to