After chewing up one alum alloy chainring _ the middle 36-tooth one _ I decided to go with Surly steel, and there are no downsides and maybe some real advantages. It's got 5 thousand miles on it and looks shiny as the day it was born. Of course, no noticeable wear. No shifting pins and ramps and that kind of yaya, but neither do vuelta or most other replacement rings. How does that affect shifting? It's a front derailleur (for pete's sake). I can't imagine why I would care if the shifting were 'easier" (supposing it could be)? And in your case, it's the big ring on the front derailleur _ how much difference would ramps and pins make in that situation? With a friction shifting system, the pinless rampless systems might even be preferable. Short is, I got no problems shifting, and would probably get all surly steel, if I could only wear the other two rings out.
On Thursday, May 23, 2013 5:53:47 PM UTC-5, Arthur Lewy wrote: > > I run a 44t outer on my XD double which needs replacing and RBW no longer > carries them. Recommendations for sources? Has anyone tried a Surly steel > chainring for 2x or 3x use? I wonder how front shifting would work. Thx > all in advance. > > Art Lewy > Seattle > Green Ramb > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en-US. For more options, visit https://groups.google.com/groups/opt_out.
