My P&S rack, currently unmounted, has exactly 15 1/4" from the center of the bolt hole to the bottom of the mounting plate that attaches it to the fork crown.
René On Thu, Aug 29, 2013 at 8:12 AM, [email protected] <[email protected]>wrote: > Boy, it sure is a good thing I came back and reread your answer, 15" of > clearance from the axel just barely clears my fender. > > After you answered, I was measuring from the eyelet on the fork, not the > axel as you had specified. > > At least I hadn't pulled the trigger on the Pass & Stow rack yet. Looks > like I will be sticking with the Mini-Front rack / Platrack combo. > > Thanks again, > > John Phillips > > > > On Saturday, August 24, 2013 3:43:58 PM UTC-7, John Stowe wrote: > >> As best i can measure, the P/S rack on my Sam has 15" of clearance from >> the center of the wheel. 3/4" of this is due to the eyelet being above the >> axle. >> >> -John >> > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/groups/opt_out. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/groups/opt_out.
