PVC cement would probably be wiser because that's what it is built for, but Gorilla glue is very thick. The issue is that once it is applied, the parts have to be clamped bacause the glue expands to fill in the gap. If it is not sealed, you'll have a bubbly mess on your hands.
On Thu, Nov 27, 2008 at 3:11 PM, <[EMAIL PROTECTED]> wrote: > In a message dated 11/27/2008 11:35:06 A.M. Eastern Standard Time, > [EMAIL PROTECTED] writes: > > Their webpage is most unhelpful. > > Oatey says it is temperature based: > http://www.oatey.com/Plumber/FAQ.html#Q02 > > Maybe if that doesn't work, some sort of silicone sealant would work. > > well, the cement is currently in the garage and it's been in the high 30's > during the day and high 20's at night, so that might help. i'll also try > giving the 1" PVC pipe a light sanding to reduce the dia slightly (if at > all) > > Chris, > Odyssey Slipways <http://hometown.aol.com/odysseyslipways/index.html> > > > > ------------------------------ > Life should be easier. So should your homepage. Try the NEW > AOL.com<http://www.aol.com/?optin=new-dp&icid=aolcom40vanity&ncid=emlcntaolcom00000002> > . > > > > -- -Mike Måne @ http://moonrcprojects.googlepages.com --~--~---------~--~----~------------~-------~--~----~ You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [EMAIL PROTECTED] Visit the group at http://groups.google.com/group/rctankcombat -~----------~----~----~----~------~----~------~--~---
