Andy Schwartz wrote:
> It came with a large sprocket that was apparently held on with a nut. I
> removed the nut (it was on very tightly) and then pulled off the sprocket.
> I was also surprised to find the sprocket and shaft are keyed. Now the key
> doesn't go all the way to the end of the shaft but almost. I am not sure if
> this is standard or not.
Please measure the shaft size and key size. If the shaft size is 11mm
and the key size is 4mm, then we can easily swap the given sprocket for
a #35 chain sprocket.
Also, if you don't mind taking the gearbox apart (simply remove the 4
screws), can you count the number of teeth on each of the gears? That
will tell us the gear ratio.
> Also included in the box are 4 mounting bolts, lock washers and regular
> washers.
Sounds like a great deal, if the gear ratio is the same as we're
currently using for our tanks.
Frank P.
--~--~---------~--~----~------------~-------~--~----~
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to [email protected]
To unsubscribe, send email to [email protected]
Visit the group at http://groups.google.com/group/rctankcombat
-~----------~----~----~----~------~----~------~--~---
