Nice job on Sketchup! You must be doing something different then me because I have never been able to draw a good circle on Sketchup. Whenever I use the tool it comes out like a decagon or something. In other words, the sides are visible. Did I miss something?
Message sent by way of mobile device On Oct 17, 2009, at 5:36 AM, Modena <[email protected]> wrote: > I will be building an M113 as my next vehicle and have been playing on > and off with designing and now have a fair bit of measurement detail > on drivetrain components. I have found it immensely helpful to the > design process to draw components to exact size in sketchup, such as > bearing housings and wheels, it really helps with visualizing and > determining available space for bolt heads and the like, rather > important where tolerances are small. > > Here are some pics of the external suspension components, springs will > be torsion bars on the inside. The vehicle body, drivetrain and > suspension will be all steel. The bearing housings are steel with > bronze bushings, 12mm for swingarms and 16mm for driveshafts. The > idler will be on a small swingarm, with a turnbuckle for track tension > adjustment. > > > > > <Drivetrain 5.jpg> > <Drivetrain 4.jpg> > <Drivetrain 3.jpg> > <Drivetrain 2.jpg> > <Drivetrain 1.jpg> > <Drivetrain 6.jpg> --~--~---------~--~----~------------~-------~--~----~ You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat -~----------~----~----~----~------~----~------~--~---
