Nice solution on feeding paint through the pivot point. Steve
On May 8, 10:04 pm, Mark_123522 <[email protected]> wrote: > All: > > Got gun elevation done. > Got the magazine air assist and trigger sequencing automated. > (you command a paintball to fire and it pulls the trigger then blasts > air down the magazine to feed the next ball.) > > Over all picture of turret (with lid > open):http://i192.photobucket.com/albums/z65/mm123521/HPIM0894.jpg > > Gun elevation chain drive and 600 inch ounce servo: > http://i192.photobucket.com/albums/z65/mm123521/HPIM0897.jpghttp://i192.photobucket.com/albums/z65/mm123521/HPIM0896.jpghttp://i192.photobucket.com/albums/z65/mm123521/HPIM0893.jpg > > Magazine air assist valve and trigger sequencing > system:http://i192.photobucket.com/albums/z65/mm123521/HPIM0895.jpg > > The Magazine air assist, blasts a puff of air down the magazine to > move the balls. > This is the first time the system was tested with the automated > timing. > It worked great, but sucked a lot of air 120 shots for a tank (63 > cubic inch, 3000 PSI). > I can adjust air pulse duration and pressure. > When I get more paintballs, i'll try and optomize air useage. > I can still switch to a 68 cubic inch 4500, psi tank. > > Mark > > -- > You are currently subscribed to the "R/C Tank Combat" group. > To post a message, send email to [email protected] > To unsubscribe, send email to [email protected] > Visit the group athttp://groups.google.com/group/rctankcombat -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
