James,
On the Comet, T39, I use a regular servo and a micro-switch. On
page one you'll see a board with 4 servos and 8 micro-switches. Just
picture using one servo and 1 switch only. I carry a separate 12volt
power supply,AA batteries in the rear hatch.Switch is placed between
the positive lead from the battery pack. Below that picture you'll see
another with the actuator attached to the marker.It works quite well
if you have enough room.
John
On May 13, 2:22 pm, James Murdey <[email protected]> wrote:
> I know that some of the tanks use a Car Door Lock actuator to trigger
> the marker, and in my usual thinking about things for a tank nature,
> I'm wondering what you need to trigger one of these from an FM
> receiver. Is there another piece of electronics between the Actuator
> you buy, and the FM Receiver? I'd guess so, but I'll need a nudge in
> the right direction on this one...
>
> Cheers,
>
> James "Many Ideas, not all good" Murdey ;)
>
> --
> You are currently subscribed to the "R/C Tank Combat" group.
> To post a message, send email to [email protected]
> To unsubscribe, send email to [email protected]
> Visit the group athttp://groups.google.com/group/rctankcombat
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to [email protected]
To unsubscribe, send email to [email protected]
Visit the group at http://groups.google.com/group/rctankcombat
