I have cut literally hundreds of chains all with a simple old angle grinder, just grind off the head of the pin and snap, takes 10 seconds.
Chris. b On Nov 18, 12:39 pm, Derek Engelhaupt <[email protected]> wrote: > I have had great success using a chain breaker on both my 35 pitch and 41 > pitch chain. Attach it to the first pin, > crank till it breaks loose, and then attach it to the second pin till the > chain comes loose completely. > > Derek > > > > On Thu, Nov 18, 2010 at 3:14 AM, <[email protected]> wrote: > > In a message dated 11/17/2010 5:32:45 P.M. Eastern Standard Time, > > [email protected] writes: > > > I just use an angle grinder or dremmel, then pry the chain apart with > > screwdriver/hammer/whatever is at hand. > > > DOH! i have 2 of my Dremmel's out in the garage and just found my "cheap, > > burned it out in less than 5 minutes" Harbor Freight special dremmel that > > has several grinding bits and such, maybe i'll get a chance to get out there > > tonight and try them on the chain........ > > > Chris, > > Odyssey Slipways <http://hometown.aol.com/odysseyslipways/index.html> > > > -- > > You are currently subscribed to the "R/C Tank Combat" group. > > To post a message, send email to [email protected] > > To unsubscribe, send email to [email protected] > > Visit the group athttp://groups.google.com/group/rctankcombat- Hide quoted > > text - > > - Show quoted text - -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
