That suspension is far to stiff . can you post pictures of your tank ? Neil R
On May 11, 4:43 am, [email protected] wrote: > In a message dated 5/10/2011 11:36:46 P.M. Eastern Daylight Time, > > [email protected] writes: > > I changed out my old crappy suspension which used wooden blocks with > compression springs to a springless suspension setup using 1/2" bolts > with cast iron wheels and swapped the plastic ball bearing containers > to stainless steel. i can now stand in my tank (178lbs) without the > suspension even moving nor the hull. i even held my 60 dog when i > stood on it, loving the steel reinforcements. Plus an added 2" of lift > to the hull from the ground isnt that bad either, now its a total > 3.34" from the ground. really satisfied with this suspension setup. > > what is a springless suspension? > > with the weight you say you have added onto the tank and it doesn't move > sounds like it's too stiff > > 3.34" clearance is a good bit (got me thinking how much the Tiger will > have) > > Chris, > _Odyssey Slipways_ (http://hometown.aol.com/odysseyslipways/index.html) -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
