That's a nice King Tiger hull.... Was it a kit or all scratch built? Derek
On Mon, Sep 12, 2011 at 8:50 AM, John Pittelli <[email protected]> wrote: > Memo to all board members MAG Industries. > > We have a new apprentice in the shop. Please note a few changes to shop > procedures. > > A . Due to the esoteric and highly confidential build materials being used > by the apprentice the following safety guidelines must be adhered to without > exception. > 1. Phase 1 - level 1 particle filtration device as shown in picture > #1 must be worn at all times. > Also note all manual fresh air ventilators must > be in the full open position.No matter how hot. > Lab coats with proper ID badges must be worn. > If your badge is out of date please > report to security for proper badge reissuance > ceremony . Please note that the Security > department has relocated to it's new building. > Shotzy's Tavern. > > Phase 2- This will be discussed when the apprentice makes it to > the next level. > > B. Tooling will be upgraded in the shop over the contruction period. It is > highly suggested that any questionable tools > (you know, tools that you have that are cracked, worn out, getting > read to fail, etc.) currently in board members > possession be returned to the main complex in order that the > apprentice can test (ie. finish them off ) them > properly. Yes, the rule of you break it you replace it is still in > place. See picture #2. > > C. Because of the colossal size of the project a minimum of 2 personnel > must be in the facilty. The apprentice and > either a journeyman or a master must be present. Picture #3. > D. WARNING- DO NOT- REPEAT DO NOT discuss any historical data with the > apprentice as this will be a distraction that might cause loss of apprentice > dermal layer or an appendage. Either way our insurance has lapsed since the > Security team seems to have used the last premium payment for a badge > reissuing ceremony. > > > Please welcome John > > (collect all fees prior to each session so we can build up the General, > oops general fund.) > > Note: My Panzer II hull is on the other side of John's hull > > > > -- > You are currently subscribed to the "R/C Tank Combat" group. > To post a message, send email to [email protected] > To unsubscribe, send email to [email protected] > Visit the group at http://groups.google.com/group/rctankcombat > -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
