>From the looks of picture #3, I take it that clothing under a lab coat is
>optional ???
From: John Pittelli
Sent: Sunday, September 11, 2011 9:20 PM
To: tank club
Cc: JOHN PITTELLI
Subject: [TANKS] MAG Industries : New Apprentice
Memo to all board members MAG Industries.
We have a new apprentice in the shop. Please note a few changes to shop
procedures.
A . Due to the esoteric and highly confidential build materials being used by
the apprentice the following safety guidelines must be adhered to without
exception.
1. Phase 1 - level 1 particle filtration device as shown in picture #1
must be worn at all times.
Also note all manual fresh air ventilators must be
in the full open position.No matter how hot.
Lab coats with proper ID badges must be worn. If
your badge is out of date please
report to security for proper badge reissuance
ceremony . Please note that the Security
department has relocated to it's new building.
Shotzy's Tavern.
Phase 2- This will be discussed when the apprentice makes it to the
next level.
B. Tooling will be upgraded in the shop over the contruction period. It is
highly suggested that any questionable tools
(you know, tools that you have that are cracked, worn out, getting read to
fail, etc.) currently in board members
possession be returned to the main complex in order that the apprentice
can test (ie. finish them off ) them
properly. Yes, the rule of you break it you replace it is still in place.
See picture #2.
C. Because of the colossal size of the project a minimum of 2 personnel must
be in the facilty. The apprentice and
either a journeyman or a master must be present. Picture #3.
D. WARNING- DO NOT- REPEAT DO NOT discuss any historical data with the
apprentice as this will be a distraction that might cause loss of apprentice
dermal layer or an appendage. Either way our insurance has lapsed since the
Security team seems to have used the last premium payment for a badge reissuing
ceremony.
Please welcome John
(collect all fees prior to each session so we can build up the General, oops
general fund.)
Note: My Panzer II hull is on the other side of John's hull
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to [email protected]
To unsubscribe, send email to [email protected]
Visit the group at http://groups.google.com/group/rctankcombat
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to [email protected]
To unsubscribe, send email to [email protected]
Visit the group at http://groups.google.com/group/rctankcombat
