In a message dated 1/28/2012 12:03:36 P.M. Eastern Standard Time, [email protected] writes:
Without going into how PWM modulation works, say you are using one of the joysticks or a momentary switch on your radio to fire the gun. If the delta switch is set to operate at 60%, when the stick has moved to that point (or beyond) the switch will turn on, and when the stick has moved back to less than 60%, it will turn off. With a momentary switch on the radio (mine has one for snap roll) configure the radio to output full servo movement when switched, will have the same effect. For turret movement, the dual ended switch can be set up to operate the same as the joystick. Hope I'm not confusing you more.. Gary okay, so as long as i hold a stick over the gun should continue to fire, or just the single shot until i release the stick and let it rest circuit and then move the stick again? (i wish they would say that the switch is only active as long as the stick is held over, that would make things so much easier to understand) Chris -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
