A low cost model aircraft tachometer works nicely. http://www3.towerhobbies.com/cgi-bin/wti0093p?&C=PAE Mike
________________________________ From: Norman James <[email protected]> To: [email protected] Sent: Wednesday, April 18, 2012 11:56 AM Subject: RE: [TANKS] Motor swap anyone? Hm. Good point... However, I'd like to cut down on weight if I can. (not that it makes much difference with those bricks for batteries) Right, off to testing we go! Speaking of which... what's a good way to measure RPM without any fancy equipment? ________________________________ Date: Wed, 18 Apr 2012 11:17:35 -0500 Subject: Re: [TANKS] Motor swap anyone? From: [email protected] To: [email protected] You can run that 36V motor at 24V or even 12V with no issues. It will just run slower and lower amount of torque. Do some testing first before dumping it. 1/3 the voltage will give you 1/3 the RPMs. Of course that is also, 1/3 the torque theoretically. Derek On Wed, Apr 18, 2012 at 9:49 AM, Norman James <[email protected]> wrote: Yes, it's been a LOOOOOONG time since I put up anything, and I'm still planning. (and planning... and planning... and planning...) >Well, I'm determined to dust off the old bits that I've accumulated, and see >what progress can't be made. >But first! >I recently inherited a wonderful bucket of parts: An X-Treme Scooter >X-360! (Yippe!) >One of these: >http://www.monsterscooterparts.com/xtremex360.html > > >However... The blasted thing is 36 volt, and I'd like a little 12 volt job >(maybe 24?). >So... >Anyone interested in a reversable 36V, 350 watt motor with #25 chain drive >sprocket? If anyone's in the DC/Northern VA area, I'd be interested in >swapping it for a 12V setup with some #25 chain and sprockets. >http://www.monsterscooterparts.com/36v35mowisp.html > > >Fortunately, the 36V battery bank is made up of 3 X 12 V (12AH) batteries, so >I'll be breaking those out and using them. (heavy lead-acid SOB's) >Likewise, the hand throttle is destined to become part of the speed control >unit. BUT! It also has this little gem install as well: >http://www.monsterscooterparts.com/36vocoformip.html > > >Is it good for anything less than 36V? I'd rather have something with >reverse... > > >Thanky kindly, and if any one is in the area, let me know as I'd be very up >for swapping ideas. >(Read the above as: I haven't a got a clue what I'm doing, and I just hope I >don't bodger it up too badly...) > > > >James > > > > > > > > >-- >You are currently subscribed to the "R/C Tank Combat" group. >To post a message, send email to [email protected] >To unsubscribe, send email to [email protected] >Visit the group at http://groups.google.com/group/rctankcombat > -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
