i am just wondering if those who might know better could advise me...... the PB's are of solid cardboard tube, then it's been impregnated with resin inside and out, then the outside has 2 layers of glass cloth and resin, the inside has 2 stiffener rings top and bottom that have also been sealed with resin. what still remains is the top lid and then the view port. the view port will be made from sections of rings just like what's inside all ready. behind that there will be plexi attached. IF i get a hold of Bill tomorrow and the lids and view ports are cut and assembled, i'd still need to coat them with resin and glass as well as mount the view port and then cut out the opening in the tube. i think i could have one, maybe 2 ready to bring with me friday..... if nothing happens and prevents me from working on them. i did find a small bundle of flux (?) brushes (them metal tube handled black brush) that should be good enough to do what i need to at this point. my only question is, when done, will they be strong enough to put out in the field, or just bring the one for display and wait until i can add another layer of tubing inside to make them even stronger (if so, i won't add the view ports yet) Chris
-- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
