I think they'd be strong enough. But don't pay too much attention to this, because I don't have a lot of experience like some of the others.
On Mon, May 28, 2012 at 11:55 PM, <[email protected]> wrote: > ** > i am just wondering if those who might know better could advise me...... > > the PB's are of solid cardboard tube, then it's been impregnated with > resin inside and out, then the outside has 2 layers of glass cloth and > resin, the inside has 2 stiffener rings top and bottom that have also been > sealed with resin. > > what still remains is the top lid and then the view port. the view port > will be made from sections of rings just like what's inside all ready. > behind that there will be plexi attached. > > IF i get a hold of Bill tomorrow and the lids and view ports are cut and > assembled, i'd still need to coat them with resin and glass as well as > mount the view port and then cut out the opening in the tube. > > i think i could have one, maybe 2 ready to bring with me friday..... if > nothing happens and prevents me from working on them. > > i did find a small bundle of flux (?) brushes (them metal tube handled > black brush) that should be good enough to do what i need to at this point. > > my only question is, when done, will they be strong enough to put out in > the field, or just bring the one for display and wait until i can add > another layer of tubing inside to make them even stronger (if so, i won't > add the view ports yet) > > Chris > > -- > You are currently subscribed to the "R/C Tank Combat" group. > To post a message, send email to [email protected] > To unsubscribe, send email to [email protected] > Visit the group at http://groups.google.com/group/rctankcombat > -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
