That is the motor and gearbox out of a Harbor Freight 18V cordless saw. 
 I'll be using two of them in the T-70 Project Extreme.  The gearbox is all 
ball bearing with steel helical cut gears.  The motor has a ball bearing 
on the pinion end.  The calculated output of the assembly is 4,629 RPM and 
38.27 lb/in stall torque.  I'm planning an additional 9:1 reduction in the 
T-70 which equates to around 357 lb/in stall at the drive wheel.

If the motor doesn't work out, it would be easy to mount a different motor 
to the gearbox such a brushless outrunner (insane torque).

ST


On Wednesday, February 6, 2013 1:00:18 AM UTC-5, [email protected] wrote:
>
>  what is that shiny, geared motor?
>  
> Chris
>

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to [email protected]
To unsubscribe, send email to [email protected]
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.


Reply via email to