How will you be doing the reduction?
________________________________ From: TyngTech <[email protected]> To: [email protected] Sent: Wednesday, February 6, 2013 11:56 AM Subject: Re: [TANKS] Tank Fest 2 That is the motor and gearbox out of a Harbor Freight 18V cordless saw. I'll be using two of them in the T-70 Project Extreme. The gearbox is all ball bearing with steel helical cut gears. The motor has a ball bearing on the pinion end. The calculated output of the assembly is 4,629 RPM and 38.27 lb/in stall torque. I'm planning an additional 9:1 reduction in the T-70 which equates to around 357 lb/in stall at the drive wheel. If the motor doesn't work out, it would be easy to mount a different motor to the gearbox such a brushless outrunner (insane torque). ST On Wednesday, February 6, 2013 1:00:18 AM UTC-5, [email protected] wrote: what is that shiny, geared motor? > >Chris -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out. -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
