Thanks for responding so fast. I'm glad to hear the winch motors are likely to be abke to hold up over many minutes of use, if I kill of my ampflows I might try a winch motor connected to the same gearbox.
The ampflow motor is rate at 235 amps at stall. I dont plan to go past 100 amps though as any thing past 118 amps is going down the hp slope anyway. I will include standard fuses, mechanical torque limiters, and electronic current sensors, and six temp sensors (on the four high side mosfets, and on the motors themselves) to avoid running over 75 amps for more than short periods and to prevent ever crossing 100 amps even temporarily. -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
