Thanks for the suggestion. I guess that would make for a smoother and stronger elevate. I'm using wood for the moment since it's the easiest thing for me to work with, but in the future it will probably get replaced.
On Tuesday, July 29, 2014 9:10:14 PM UTC-4, jvragu47 wrote: > > Looks very well thought out Caleb. A suggestion. For the future,you might > want to replace the wooden linkage with either plastic or metal if you can. > > On Tuesday, July 29, 2014 7:52:23 PM UTC-4, Caleb Smith wrote: >> >> >> Ok, rotate motor was ordered, plus a ESC to control it. >> Took some photos of the elevate system for ya'll. You can see the >> extension on the servo horn which is both crimped and glued. You can also >> sort of see the piece I built that will go on the gun plate. Last photo >> you can see where I'm planning on mounting the door lock actuator, plus >> the cardboard splinter shield which is built out of the box the gun was >> shipped in. The cardboard splinter shield isn't permanent, I was just >> using it as a test to make sure my measurements were correct before I >> started cutting the wood. >> >> >> >>> -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
