Hello guys, I finaly put my tank hull into a working condition!! It's been long since the last time I post some news of it...
I first made a stupid mistake when pluging my batterys to finally blow up my ESC, the C12C I had and some more element and wires... After re-purchase all component and receive a new C12C thank to the super after market service from Frank I finally made some test on my running gear. I had a lot of ajustement to make with the tracks and the suspension but there is the video of what it look like. I had to buy a new futuba controler and receiver cause the C12C work superbly but I had some signal difficulty using a wireless PS2 controller probably due to the aluminium hull... https://www.youtube.com/watch?v=NI4tNkiUXNs Report of my video footage : - I will have to try if it's better to use a directly 3d printed ABS srocket wheels cause the Smooth-Cast 305 sprocket I made are a little too dry on impacts... -redesign of the inner track pad to get stronger guides theets -redesign of the outter track to get a simple flat pad ( everybody said it, myself too but I get too much traction on grass and when turning and I just rip the grass off putting too much pressure on the track theeths and my running gear... -The MPSS3 suspension from Field of Armor Tanks unit work perfectly!!! -Work on my idlers wheels cause they both does not perfectly aligns with the rest of roadwheels. Hope you enjoy the video!! Jean-Maxime Cyr St-Pierre -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
