https://youtu.be/C3GInnby0d0
On Monday, April 3, 2017 at 9:13:23 AM UTC-7, Loren wrote: > > Yes, my phone wouldn't allow me to attach any, tried deleting it, but that > didn't work. Since I'm at the library, I can attach them here now. > Hopefully it's a little clearer. The nut between the swingarm and the > hull is tightened against the hull, it and the one on the interior hold the > bolt on the hull. I didn't use a spacer, but you could if you need to. > > On Sunday, April 2, 2017 at 8:59:58 PM UTC-4, jmaxhl23 wrote: >> >> Yep would be easier with pics...!!! >> >> >> Jean-Maxime Cyr St-Pierre >> >> Le 2 avr. 2017 5:53 PM, "Loren" <[email protected]> a écrit : >> >>> Keep forgetting I have a pic to put up for this. This is quite simple, a >>> bolt with a hole drilled in it and a pin made of piano wire. The pin >>> extends down into the tube making up the swing arm, and rides on the lower >>> surface, being pushed on when the wheel is pushed up. >>> >>> Two nuts hold the bolt to the hull, with the bolt head outside. A wrench >>> in the outside nut and the bolt head allow the grip on the hull to be >>> loosened, allowing the bolt to be rotated to adjust the pressure the spring >>> pin is putting against the swing arm, changing the ground pressure and/or >>> track tension. >>> >>> I really need to make a example piece, with the side of the tube cut >>> away so the actual arrangement can be seen from the side. You do need a >>> sturdy side wall to take the torsion on the bolt used. >>> >>> -- >>> -- >>> You are currently subscribed to the "R/C Tank Combat" group. >>> To post a message, send email to [email protected] >>> To unsubscribe, send email to [email protected] >>> Visit the group at http://groups.google.com/group/rctankcombat >>> >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "R/C Tank Combat" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
