HI All,
A guy has 1/2 loaded his big surrette 24v battery, yep put 12v loads
onto only one side of the 24v battery.
Now after 2 yrs 12v side is low voltage, 24v side is boiling like crazy.
System is charged via SW4024, big genny and good size array.
so my question is can/should I
1. remove the 12v by installing a Vanner or similar.
2. put a 12v charger onto the lower 12v side to put an equal charge
into the batteries.
( I have never had success trying to charge up a highly unbalanced
battery)
thanks,
jay
peltz power
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
